10 Best Coping Sled For Router & Shaper [Reviews]

Making end grain cuts, lap joints, as well as rail and stile doors, safely and accurately requires a top notch coping sled.

Here I've listed the ten best coping sleds for router and shaper 

MY #1 CHOICE
1. Woodhaven Coping Sled 
Why it's my favourite
  • Can adjust for long or small woods
  • Lightweight
  • 24" Fence & 11-3/4" miter bar

Coping Sleds

Features

My Thought

Price

2. Rockler Rail Coping Sled

Weight:


Speed: 8000-10000rpm

Most affordable

3. Woodpeckers Coping Sled 

Power: 12amp 2.25hp


Speed: 8000 -25000 rpm

Premium Choice

4. Woodhaven Medium Coping Sled

Power: 15amp 3.5hp


Speed: 10000 - 22000 rpm

-

5. MLCS Coping Sleds

Power: 11amp 2.25hp


Speed: 8000-24000 rpm

-

Table Of Contents

10 Best Coping Sled For Router & Shaper [Reviews]

1. Woodhaven 525 Large Coping Sled - The Best

The large 525 coping sled is multi-functional and works on both the shaper, table mounted or handheld router, either against the fence or in the miter slot.

Firm control

You have excellent control over both your work and the sled with two fully adjustable feed handles.

Use with or without miter bar

It has an adjustable miter bar that you can place at six different locations. It is an 11 -3/4 -inch steel bar.

Versatile with huge toggle clamp capability

It includes two 500 pound inboard and one 500-pound outboard toggle clamp. It can hold materials from 1 ¾ to 2 ¾ -inches which you can buy an additional riser kit for the sled.

  • Use it with large or small wood equally well by repositioning clamps
  • Nice weight at 14 pounds
  • 11 ¾ inch steel miter bar
  • A fence of 24 – inches long
  • Initial assembly takes time with the different parts

2. Rockler Rail Coping Sled - Most affordable

As the most affordable coping sled, the Rockler rail coping sled is also very easy for novices to test their cutting skills.

Study and smooth sliding

It features a 3/8 – inch phenolic base that remains flat and rigid and it offers workpieces a smooth sliding surface.

An elevated, clear guide

The reference edge is smooth-running and large and the elevated guide is clear that allows you to see what you do. The guide runs 2  1/16 – inches above the router table.

No need for a miter track

You only keep the clear guide against the router fence and no need for miter tracks as it does not have a miter slot guide included.

  • Cuts woods of 1 ½ inch thick
  • Base length of 12 ½ -inches x width or 7 ¾ -inches
  • The push handle is 16 inches longs
  • -

3. Woodpeckers Coping Sled

Woodpeckers are easy to use and set up, are robust, and works on all router tables.

Secure your workpieces two ways

Work is secure as the coping sled traps the piece between the fence and the adjustable top plate. It can be adjusted to hold material of up to 5 ½ - inches wide. Two clamps are also securing the piece that prevents lifting.

A clear guide

The sled will track along the fence instead of the miter slot which is an easier and faster setup. You also don’t need to align the router fence to be parallel to its miter slot. It furthermore means you do not need a miter slot on your table.

  • Very easy to use
  • 7.7 pounds in weight
  • 2 clamp knobs with two handles to clamp a beam in place
  • While the screws work well, clamps with toggle motion would be faster and more convenient.

4. Infinity Coping & Cross Cut Sled

The Infinity is made from precision, anodized CAN-machined aluminum which makes it almost indestructible and extremely accurate.

Versatile clamping system

Its versatility comes from its clamps with two options. Three toggle clamps secure work with adjustability from 5/8-inches to 1 ¼ -inches.

Visor adds to accuracy and safety

3/8 -inch think Lexan is used for the visor with adjustable table surface settings from 2 ½ -inch to 3 -inches above. The clear view protects against flying pieces while giving you a clear view. Depth cutting can also be adjusted from 11/16 – inches to 1 7/8 -inches.

Miter bar compatibility

The miter bar has two mounting locations and you can choose to have if 3 – inches or 4.4 -inches from the coping sled’s edge.

  • It weighs 7.5 pounds which adds to its stability
  • The base of the sled has a low friction film
  • No vibration with a 3/8 – inch phenolic base
  • You cannot use it on materials that are ½ -inch thick as it is too thin and you will have to place hardwood on top.

5 Rockler 921727 Rail Coping Sled

The Rockler Rail coping sled gives you a comfortable, firm grip irrespective of which angle you approach it, with its improve tall, round handles.

Study and smooth sliding

It features a 3/8 – inch phenolic base that remains flat and rigid and it offers workpieces a smooth sliding surface.

An elevated, clear guide

The reference edge is smooth-running and large and the elevated guide is clear that allows you to see what you do. The guide runs 2 – inches above the router table.

  • One-hand operation and tool-free adjustments for its toggle clamp
  • Workpiece dimensions are 5 inches wide and 1 ¼ - inches thick
  • The sacrificial block is replaceable if you want to use a different profile
  • It could have been heavier at only 4, 85 pounds

6. Woodhaven 526 Medium Coping Sled

The 526 medium coping sled works with shaper and router, either against the fence or in the miter slot for accurate and safe cope and crosscuts.

Versatile with huge toggle clamp capability

It includes two 500 pound inboard clams. It can hold materials from 1 ¾ -inches.

Heavy duty

The phenolic base is ½ inch thick and holds up to six inches wide stock. You can extend the height with an optional riser kit which goes up to 2 34/5 inches. The base does not distort with hard clamp pressure.

Adjustable miter bar

You can choose between six different mounting locations with the 11 ¾ -inch adjustable steel bar.

  • It weighs 9 pounds which adds to its durability and sturdiness
  • Lifetime guarantee
  • 11 ¾ inch steel miter bar
  • A fence of 12 – inches long
  • Adjustable feed handles
  • Initial assembly takes time with the different parts

7 Woodhaven 528 Small Coping Sled

The 528 small coping sled works on both the shaper and router, either against the fence or in the miter slot for accurate and safe cope and crosscuts.

Versatile with huge toggle clamp capability

It includes two 500 pound inboard clams. It can hold materials from 1 ¾ -inches.

Heavy duty

The phenolic base is ½ inch thick and holds up to six inches wide stock. You can extend the height with an optional riser kit which goes up to 2 34/5 inches. The base does not distort with hard clamp pressure.

Adjustable miter bar

You can choose between six different mounting locations with the 11 ¾ -inch adjustable steel bar.

  • Weighing 6.5 pounds
  • Lifetime guarantee
  • 11 ¾ inch steel miter bar
  • A fence of 12 – inches long
  • Adjustable feed handles
  • It could have a second clamp

8 MLCS 9548 Coping Sled

This coping sled effortlessly cuts narrow and small cuts as well as tricky cross-grain rail cuts while keeping your fingers away from sharp blades.

Adjustable dual fence with a clear base

Its dual fence combined with its clear base adds to its strength and rigidity. Its measurements are 6 ½ -inches x 16 – inches x 3/8 -inches thickness

Varied stock uses

You can cut stick up to 4 ¾ -inches wide, including narrow pieces

  • You can adjust or reposition the handle
  • 500-pound capacity
  • Replaceable backer block
  • Dual pad hold downs
  • Reverse feed operation
  • It is lightweight at 4.45 pounds

9. Fulton dual fence coping sled

The Fulton coping sled features a3/8 -inch Plexiglass base and tracks surely against a table fence

Wood remains firmly in place

The adjustable fence has an abrasive strip that prevents work from wandering or sliding. At the same time is it clamped down firmly with its heavy-duty 1 5/8-inches toggle.

No need for a miter slot as a reference

This coping sled uses the fence which means you don’t have to worry about its miter slot. It has a clear acrylic fence which is 2 – inches above its base.

  • Dual fence design
  • The single sacrificial block included
  • The fence has an abrasive strip to secure work
  • Weighs only 4 pounds

10 Trend Pushblock Router Coping Sled

The Trend Pushblock router coping sled can exchange its handles when you want to make end cuts with an overhead router as well as a table.

Guaranteed flatness

The base has a 5/16 -inch thickness that ensures flatness while its sliding front has an abrasive grip.

Adjustable with spelch block

Breakouts are prevented through the spelch block while you can adjust the height with the included toggle clamp.

Cutting ability

The maximum width that it cuts is 4-inches with a minimum accepted thickness of 19/32 – inch and a maximum of 1 3/16 – inches.

  • Spelching block facility
  • Cope cutting
  • Overhead routing
  • Lightweight at 1.7 kgs.

Conclusion

The coping sled reviews we listed cover a broad spectrum that includes the cheapest coping sled to the best coping sled. Each one will keep you safe, while you will have accurate and smooth results.